Pages

▼

Friday, January 4, 2013

4MLinux login.

Assuming that your copy of 4MLinux Live CD is ready, it's time to try it! Some people have a problem to log in into 4MLinux live CD. There is no default password in 4MLinux. You will be asked to choose one during the boot time.

 Update:
New versions of 4MLinux LiveCD do not require any password to enter X.Org session, which is started automatically without needing to log in.
You still have to to setup root's password to be able to log in into 4MLinux, that is installed to a hard disk drive.


1) Boot your 4MLinux CD (or USB):


2) On the 1st screen you are asked to choose a password for root:
 
3) ...and to repeat this password:
Note: If you see any warnings ("Bad password: too short" or "Bad password: too weak"), you can ignore them now, meaning that you should repeat the same ("bad") password again. You'll be able to change it later. 
4) On the 2nd screen you can log in as "root", using this new password chosen by you:
 

 Welcome to your 4MLinux Box!
Are you going to install 4MLinux to a hard disk drive? If so, please continue your reading here.

at

69 comments:

  1. bitfhackerApril 28, 2013 at 12:33 PM

    I'll surelly try this!

    ReplyDelete
    Replies
    1. AnonymousNovember 30, 2023 at 6:34 AM

      if I want to install steam and lutris, bottles on 4mlinux how can i do that ?

      Delete
  2. AnonymousJune 30, 2013 at 12:26 AM

    So much browsing to find:

    based on Fedora ?
    386, but not PAE (I run 16GB memory) ?

    Ca use Fedora's repositories?

    ReplyDelete
  3. 4MLinuxJune 30, 2013 at 2:22 AM

    Read points 3.2 and 3.3 here:
    http://4mlinux.com/help.txt

    4MLinux includes limited support for "alien" packages. The following commands should work:
    installpkg package.txz (for Slackware packages),
    dpkg -i package.deb (for Debian and Ubuntu packages),
    rpm -i package.rpm (for Fedora and RedHat packages).

    4MLinux native package manager is called "zk".

    ReplyDelete
  4. AnonymousAugust 2, 2013 at 5:56 AM

    -sh : startx : not found

    ReplyDelete
    Replies
    1. 4MLinuxAugust 3, 2013 at 2:16 AM

      Are you trying to run X in 4MLinux Core ?
      http://4mlinux.blogspot.com/2013/07/4mlinux-releases.html

      Delete
  5. Bob KlahnDecember 5, 2013 at 1:20 AM

    Ok, I got 4mlinux from Linux format. I'm installing the media edition on an SD card to run an HP mini that had the Hard drive die. That hard drive is very expensive.

    So, couple questions, is it possible to run this with no passwords?

    Can 4mlinux be used to write .dd files to solid state drives? One need I have is to restore the DOM on some thin clients. Windows XPE originally installed. Have a fellow I am trying to do this for.

    I have a LOT of computer experience, but little Linux experience, and none with 4mlinux till right now.

    These are my current prime projects.

    Oh, and why does it use Wine to load Firefox for windows instead of Firefox for linux?

    My only other plans for this for now are to add Teamviewer and Skype. But first I get it running.

    ReplyDelete
    Replies
    1. 4MLinuxDecember 5, 2013 at 4:36 AM

      Have a look here: http://4mlinux.blogspot.com/2013/01/welcome-to-4mlinux-blog.html

      "My only other plans for this for now are to add Teamviewer and Skype". Even advanced Linux users would have to have a little time to figure out how to get it work in 4MLinux.

      To be quite honest, 4MLinux may NOT be the best choice for your plans... Good luck :-)

      Delete
    2. Bob KlahnDecember 5, 2013 at 10:31 AM

      Thanks. I do need an OS suitable for smaller systems, as it will run in ram. Also, I have other, older and slower computers I want to work with. So, maybe I will have to keep looking.

      Delete
    3. 4MLinuxDecember 5, 2013 at 10:45 AM

      So 4MLinux (especially its main edition, which is only 50 MB in size) can be very good solution for that !
      In my first answer above I meant that adding new programs (which are not available out of the box) might be not easy. On the other hand you have Wine in 4MLinux, so Win32 ("exe") applications can be installed very easily :-)

      Delete
  6. AnonymousSeptember 1, 2014 at 1:26 PM

    Well, 4MLinux looks promising, However, When I try to test it in Virtualbox, I get a "kernel panic not syncing error". I kind of have this policy that if I can't test a distro in vbox, then it is not worth testing. Soooo, how do I get 4mLinux to run in Vbox ???

    roadhog293@hushmail.com

    ReplyDelete
    Replies
    1. 4MLinuxSeptember 1, 2014 at 2:23 PM

      There may be 14512 reasons :-) You must learn of lot how to report errors. To cut a long story short, you should give as many details as possible (such as 4MLinux version, Virtual Box version, what system as you are running). Knowing that, a developer can try to reproduce the error reported by you. Next, he can try to fix it.

      PS.
      All 4MLinux screenshots you can see at Softpedia and Distrowatch are taken using Virtual Box!

      Delete
    2. UnknownNovember 14, 2014 at 4:30 AM

      I have the same problem. I tried 4MLinux-10.0.iso on two different machines:
      1. Windows 7 32bit, Virtualbox 4.3.10
      2. Ubuntu 12.04 32bit VirtualBox 4.3.18
      Results identical! It goes through all settings - did not help!
      http://hostingkartinok.com/show-image.php?id=29ff529df2330aff7c2286d5fac9f143

      Delete
    3. 4MLinuxNovember 14, 2014 at 5:04 AM

      Can you also send 2 screenshots of your VB settings (General + System)?

      Delete
  7. UnknownNovember 14, 2014 at 5:41 AM

    http://hostingkartinok.com/show-image.php?id=dd5c0a67a004e641bd03d6c64379427c
    http://hostingkartinok.com/show-image.php?id=9f29a8f25c14e452a97372bb6b0f7c29
    http://hostingkartinok.com/show-image.php?id=d5091feb537b1d5272b1c150dfb4a8b4

    ReplyDelete
    Replies
    1. 4MLinuxNovember 14, 2014 at 6:37 AM

      Well... I had no problem to run 4MLinux with your settings. How much RAM does your computer has (a real one, not a virtual one) ?

      Delete
  8. cheapybobNovember 28, 2014 at 9:41 PM

    Is there a way to get it to need less memory? I only have 512 mb on the Dell Inspiron 8100 Laptop and am getting an out of memory kernel panic quite a ways into the boot.

    ReplyDelete
  9. 4MLinuxNovember 28, 2014 at 11:33 PM

    You have enough RAM to run the basic version of 4MLinux (see: www.4mlinux.com/download.html).
    Additionally, after installing 4MLinux to your hard disk drive, you will be able to update it to its full version by executing "zk update" in your terminal (fully automatic process).
    Good luck :-)

    ReplyDelete
  10. cheapybobNovember 29, 2014 at 7:07 AM

    Thanks for the reply. I downloaded it a burned a flashdrive with Unetbootin and it is able to boot now, but X windows won't start. I tried all 3 boot options with same result. I looked at the log and:

    its got an odd error "systemd-logind: failed to get session: The name org.freedesktop.login1 was not provided by any .service files"

    but i think the big problem is that it can't find the "nouveau" driver for the nVidia GeForce 2 Go (NV11) video card which can do 800x600, 1024x768, 1280x1024 and 1600x1200 if its got the right drivers. It then fails looking for an "nv" driver, then a "modesetting" driver, and ends up running a "vesa" driver.

    Would there be any way to get the nouveau driver loaded? Or do you have a better suggestion? Debian Jessie and Manjaro and antiX MX-14.2 all come up 1600x1200 automatically using nouveau, btw, but as you might guess this machine needs to be running a lightweight OS.

    Thanks for any ideas...

    ReplyDelete
    Replies
    1. 4MLinuxNovember 29, 2014 at 8:35 AM

      You should be able to use the default boot option (without VESA). In this case framebuffer should be enabled automatically during the boot, and next the "fbdev" driver should be loaded by Xorg. Whatever the reason is, framebuffer is not up, so Xorg tries to use the "vesa" driver instead. You may try to force the Linux kernel to load frame buffer by executing one of the two commands "udev" or "restart" (both are 4MLinux specific scripts).
      If this does not work, you can choose the boot option with VESA framebuffer enabled and "play" with various display resolutions.

      Delete
    2. cheapybobNovember 29, 2014 at 9:05 AM

      Thanks for replying again. I tried booting via default and then running udev. it didn't get any error but didn't appear to do anything. I then tried running restart, which ran some stuff, and then tried to bring up X but was unsuccessful.

      I remember with older kernels I had to put nomodeset on the boot line.

      how do I play with the resolutions under the VESA option? Its always been able to get at least 1024 x 768 before with everything.

      thanks :)

      Delete
    3. cheapybobNovember 29, 2014 at 9:18 AM

      Ok, I got X windows in 1024 x 768 using the VESA option. Maybe if I can get it installed to the hard drive I might be able to add the nouveau driver?

      Delete
    4. 4MLinuxNovember 29, 2014 at 9:58 AM

      You may get it right now:
      http://sourceforge.net/projects/linux4m/files/10.0/updates/10.1/addons/xorg/

      Installation: "zk addon_xorg-drv-1.16.1.tar.xz"

      Delete
    5. cheapybobNovember 29, 2014 at 11:55 AM

      Making progress....

      I booted it with VESA, set res to 1024x768, got into X, ran the installer, and it was a terminal window that eventually said Done! but didn't close. Eventually I closed it, rebooted under Manjaro (Arch derivative with Grub2), the went to terminal, su to root, ran grub-install /dev/sda, then ran grub-update, which then adds 4M to grub menu on sda9, then reboot, select 4M line and e to edit, change vga=normal to vga=773 because ask isn't valid, then it starts booting, but gets as far as swap, and then starts repeating the message

      can't run 'getty': No such file or directory

      and locked in endless loop there

      Any ideas?

      Thanks

      Delete
    6. cheapybobNovember 29, 2014 at 12:11 PM

      Ok, I rebooted under Manjaro and mounted sda9 and went and looked, and basically it doesn't look like the installer ever really finished installing because the only files in /bin are busybox and sh, and the only file in /sbin is init, so there is no getty program anywhere, and my guess is the respawn just keeps trying anyway.

      Any idea what went wrong and how to fix it?

      Thanks

      Delete
    7. 4MLinuxNovember 29, 2014 at 12:23 PM

      It looks that Grub ignores actual Lilo settings when importing them, so it's Grub's bug :-)
      4MLinux needs read-write permissions, so try to change the corresponding line in Grub configuration. It should be something like this: "linux /boot/bzImage root=/dev/sda9 rw vga=normal" (the "rw" is important !)

      Delete
    8. cheapybobNovember 29, 2014 at 12:51 PM

      Ok, not sure how to fix that correctly, but for now I just went in and edited the grub.cfg. Got 4M to boot and now running the zk update

      Delete
    9. cheapybobNovember 29, 2014 at 1:26 PM

      ok, the zk update completed, and then i went and added a user bobc and went to /home/bobc and did a wget of the addon_xorg-drv-1.16.1.tar.xz and then from that directory under root ran the zk addon_xorg-drv-1.16.1.tar.xz which appeared to extract things including some nouveau stuff. Then I rebooted, but X doesnt come up and still says nouveau is not found. Any ideas what to check?

      thanks :)

      Delete
    10. cheapybobNovember 29, 2014 at 1:29 PM

      PS: when I look in /usr/lib/xorg/modules/drivers i see a file called nouveau_drv there. Note that it does not have a .so extension like the vesa_drv.so file

      Delete
    11. 4MLinuxNovember 29, 2014 at 2:06 PM

      1) Use "root" account to log in.
      2) Tell 4MLinux that you want 3D drivers. You can do it in one click in JWM, or you can execute "3d" in console shell.

      Delete
    12. cheapybobNovember 29, 2014 at 2:17 PM

      X won't start with 3D enabled or disabled. I was able to get it to start with nomodeset nouveau.modeset=0 on the boot which works for antiX MX-14.2, but it was 1024x768.

      Delete
    13. 4MLinuxNovember 29, 2014 at 2:26 PM

      Well... It looks that the Linux kernel in 4MLinux does not support your card. Sorry :-(
      You can still use VESA framebuffer. See the DISPLAY section of the 4MLinux FAQ (http://4mlinux.com/faq.txt)

      Delete
    14. cheapybobNovember 29, 2014 at 9:04 PM

      ok, thanks for trying. One of these days I'll get rid of my old machines

      Delete
  11. balgeFebruary 5, 2015 at 1:18 AM

    Hi. If I boot the the 11.0 version live cd (full version), but I get terminal with prompt (no x). After startx I get: "x server is already running", however I don't have jwm, just the terminal. What can I do?

    ReplyDelete
    Replies
    1. 4MLinuxFebruary 5, 2015 at 2:31 AM

      See the requirements on 4mlinux.com/download. If the basic version does not work either, please contact me via email (4mlinux.com/help).

      Delete
  12. CesarAugust 30, 2015 at 12:18 AM

    I installed 4MLinux in my computer, but I can't login

    ReplyDelete
    Replies
    1. CesarSeptember 4, 2015 at 7:42 AM

      I need to start X automatly please, I don't know how to do

      Delete
    2. 4MLinuxSeptember 4, 2015 at 8:28 AM

      Ask your questions here:
      http://www.linuxquestions.org/questions/4mlinux-115/

      Delete
    3. UnknownApril 4, 2019 at 11:15 AM

      Instalei várias vezes 4mlinux 29.0 e nunca consegui logar aparece login incrrect alguém pode me ajudar.

      Delete
  13. AnonymousDecember 5, 2015 at 10:00 AM

    I made a live usb with Unetbootin. The OS work, but I can not stop the sistem. The command ,,shutdown -h now,, not work. ,,Reboot,, work. How could I stop the sistem?

    ReplyDelete
    Replies
    1. 4MLinuxDecember 5, 2015 at 10:25 AM

      Lock/Quit from the main Menu (in Live CD/USB you'll be asked to choose password for root).

      Delete
    2. AnonymousDecember 5, 2015 at 11:09 PM

      I forgot to mention that it is about http://antiviruslivecd.4mlinux.com/ (antivirus live cd) and I was redirected here. Another problems (bugs?) are:
      1.I made a persistence around 2GB on stick, but antivirus updates not remain
      2. Can not upgrade the antivirus. After download the file, when I try to run the scanning process many errors appears about the ClamAv.

      Delete
    3. 4MLinuxDecember 5, 2015 at 11:37 PM

      This post is not about problems with antivirus software. Please start a new thread here:
      http://www.linuxquestions.org/questions/4mlinux-115/

      Delete
  14. HelmutMarch 16, 2016 at 5:29 AM

    how to mount remote server? cant find smbclient...

    ReplyDelete
    Replies
    1. 4MLinuxMarch 16, 2016 at 6:57 AM

      Hi Helmut,

      Your question has nothing to do with logging into 4MLinux. Please use this forum:
      http://www.linuxquestions.org/questions/4mlinux-115/

      Delete
  15. UnknownJune 30, 2016 at 7:37 AM

    I'm trying to load 4M onto a USB. I've tried with the Mac Linux USB loader but think maybe I'm loading as the wrong base kernel. When I start it up, there seems to be a problem with the Grub. Before that it gives an error loading initial RAM saying that the kernel must be loaded first.

    From there I am left on the GNU screen with a grub> prompt. What did I miss?

    ReplyDelete
    Replies
    1. UnknownJuly 1, 2016 at 2:27 AM

      Before I go into that ocean of answers, I'm trying to get the enterprise.cfg for 4M. Is it Ubuntu family or Debian?

      Delete
  16. AnonymousDecember 1, 2016 at 1:11 PM

    It seems i must log in to start live sesion. What user should i use?and password?

    ReplyDelete
  17. AnonymousFebruary 11, 2017 at 3:09 AM

    Hi,can i install ubuntu packages too? If yes,how?

    ReplyDelete
    Replies
    1. 4MLinuxFebruary 11, 2017 at 3:30 AM

      Please ask this question here:
      http://www.linuxquestions.org/questions/4mlinux-115/

      Delete
    2. AnonymousFebruary 11, 2017 at 6:10 AM

      Ok,thank you very much :)

      Delete
  18. AnonymousFebruary 19, 2017 at 1:35 AM

    I`ve installed 4M Linux on the hard disk of an old sony vaiao.. I`ve one pssword ans I remeber it propperly, but what must I give into the first line of registration, when i start
    it second time?

    ReplyDelete
    Replies
    1. 4MLinuxFebruary 19, 2017 at 2:00 AM

      The answer:
      http://www.linuxquestions.org/questions/4mlinux-115/lost-password-4175600113/

      Delete
    2. UnknownApril 27, 2017 at 2:50 AM

      thank you for your answer


      ...

      didnt see my Problem there

      it´is possiple to enter the word root in user Login

      but not the choosed Password after

      by the way there was been also no prompt with asking for repeating Password when I was creating Password

      perhaps I have to try out a non-beta Version

      I will try last time a new Installation first

      Delete
    3. UnknownApril 27, 2017 at 4:00 AM

      ok , the stable Version is as same

      what I need is oviously the command to start the System when I have the prompting:
      root@4MLinx

      can anybody tell me?

      thanks

      Delete
  19. AnonymousMay 14, 2017 at 1:42 PM

    don't think you read all the documentation ... type in 'startx' and enter...

    ReplyDelete
  20. AnonymousFebruary 12, 2018 at 7:15 AM

    czy 4mlinux ma instalator graficzny

    ReplyDelete
  21. AnonymousFebruary 27, 2018 at 3:33 AM

    Hi...i have installed 4mlinux in dual boot with win10 but,when i start PC session , i see only GNU linux...Can anyone help me?

    ReplyDelete
    Replies
    1. AnonymousFebruary 27, 2018 at 4:15 AM

      https://www.linuxquestions.org/questions/4mlinux-115/

      Delete
  22. AnonymousMay 15, 2018 at 6:45 AM

    How can i change the user password? I can't remember it. Thank you!

    ReplyDelete
  23. AnonymousMay 28, 2018 at 9:04 PM

    After booting through USB. I am getting this error: menu.c32:not a COM32R image
    . I am no expert to solve this. Please help.

    ReplyDelete
  24. Stefanita VilcuSeptember 22, 2019 at 1:58 AM

    This is really great work!

    Do you plan to insert kexec-tools as an addon? I want to use 4M as a bootstrap for larger installations (ex. CentOS) over unreliable connections.

    Thanks!

    Stefanita Vilcu

    ReplyDelete
    Replies
    1. 4MLinuxSeptember 22, 2019 at 3:28 AM

      Thanks :-)
      Please use this forum:
      https://www.linuxquestions.org/questions/4mlinux-115/

      .

      Delete
  25. AnonymousApril 4, 2022 at 10:01 AM

    Tanks is very very good.
    I love 4mlinux top! Use is french perpignan.

    ReplyDelete
  26. AnonymousApril 17, 2023 at 2:42 PM

    is it possible to add a python container / venv instead of LAMP. nowadays PHP Is declining

    ReplyDelete